Samsung Galaxy Trend Plus is a mid-range device, with its 1.2GHz CPU with 768MB RAM, 4-inch touchscreen display, 5MP camera and Android 4.2 firmware.
Before You Begin:
1: Backup Your Data First.
2: Enable USB Debugging on your device. To do so, go to Settings > Applications > Development > USB debugging. The checkbox of USB Debugging should be ticked.
3: You should charge your device so that there is 30% or more amount of battery charge on your device.
4: Download USB Drivers (ADB and Fastboot) for your Android device to make it compatible with Windows.
Here Is The Procedure To install CWM Recovery Galaxy Trend Plus:
First OF All Download Following Files:
Follow The Easy Steps:
1.Extract Odin307.zip to a folder on your desktop.
2.Extract CWM_6.0.3.7_notouch_GalaxyTrendPlus_s7580_bdc_v0.2.zip to another folder on your desktop and you should end up with a file called recovery.tar.md5 in the extracted folder.
3.Double-click on Odin3 v3.07.exe from the extracted folder to start the Odin tool.
4.Power off your device and put it into download mode. For this, press and hold the Home + Volume Down + Power buttons simultaneously for 3 to 5 seconds until you see the warning screen and now press the Volume Up button to enter download mode.
5.Connect your device to your Windows PC using a compatible micro-USB cable and if your PC installs drivers at this point, let it do so. Once it is done, the ID: COM field on Odin should light up blue, signifying that Odin has recognized your device without a problem and if not, make sure you install the proper drivers and try again.
6.Click on the PDA button on Odin and navigate to the location of recovery.tar.md5 to load it on to Odin. Remember to make sure that all the fields under Options section are unticked and then click on Start.
Step 7 – Wait for the PASS message on Odin and reboot your device.
This is all done and now your device has CWM recovery installed. To access CWM, with the device powered off, press and hold the Volume Up + Home + Power button until the device boots and goes blank, then release the Power button.
0 comments:
Post a Comment