Skip to main content

Flash Samsung galaxy Core GT-I8262 With Origional Stock ROM(India)




This tutorial shows you how to Flash stock Firmware using Odin on Galaxy Core Gt-i8262

Requirements :--->

1. ODIN 3.07
2. Samsung USB Drivers 
3. Stock firmware
download from post 2
4. Official USB cable
5. Ofcourse Galaxy core 

note :-> click on above requirements to download
Flashing Tutorial :-->

DON'T FORGET TO PRESS THANX BUTTON FOR MY HARD WORK

1. Install usb drivers on pc....
2. reboot ur pc 
3. Download the ODIN 3.07 & save it in your PC and extract its content to Desktop.
4. Download the update firmware.zip && save it in your PC and extract the update file on your Desktop.
5. Now, turn off your Samsung Galaxy Core 
6. Boot your Galaxy Core into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time and connect USB cable.



7. now ur phone will boot into download mode ........u will see a "WARNING" 


8. now press "VOLUME UP" button to enter into download mode :--> 

9. Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.

10. When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.

11. click on PDA button && select the Gt-i8262XXXXXX_i8262XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]

12. now click on "START" button & it will take 10 minutes to flash the firmware ....

Note:-> DON'T interrupt the flashing process, it may brick ur device [ soft or hard brick]

13. U will see a "PASS" & "RESET" on ODIN application...

14. Ur phone will reboot automatically & u should be booted successfully ....

15. enjoy  [ u have flashed stock firmware successfully on ur device ].

Comments

Popular posts from this blog

How To Root the Xolo Q700 and flash CWM Recovery

Do you want to root Xolo q700? Do you want to install CWM recovery and take backups, install custom ROMs and do more? Well, here's a step by step method to root the phone and install CWM recovery.  Requirements: The Xolo Q700 phone fully charged Download the USB and ADB drivers for the Xolo Q700 from  here  and  here Download the Motochopper rooting utility from  here Download the flash tool for the recovery from  here Download the recovery image from  here Download the necessary drivers and tools to a folder on your desktop and extract the archives to their respective folders. First, we shall root the phone and later install the CWM recovery patch. Make sure you have administrative rights on your Windows PC before you proceed. Install the necessary driver(s) Rooting the Xolo Q700 For this, we will need the USB and ADB drivers installed. Go ahead and install the drivers (usually one driver should work, but in certain cases, you would have to install bo...

How To Install Wordpress in Linux server

  Hello friend's In this session i am going to tell you how to install Worldpress in Linux server, Wordpress is open source blogging tool and CMS based on PHP and mysql which runs on a web hosting service. Wordpress is use by more then 18.9% of the top 10 million website. In order to install wp we have to configure the   web server   & mysql server. So now i am going to configure mysql database, As you can see sql database has been configured successfully and time to download Wordpress and configure the same, I already downloaded wordpress zip file, Ok guys we successfully configured the wordpress config file and added the our mysql database, user and password, all configuration done now time to move and install wordpress Go to you browser and type http://localhost (i did not configure dns server so i put localhost if you already install dns server then type you website name ) and fill required information After filling the same click to install Bingo :) wordpress ins...

How to Install CWM recovery on Samsung Galaxy Trend Plus GT S7580

Samsung  Galaxy  Trend Plus is a mid-range device, with its 1.2GHz CPU with 768MB RAM, 4-inch touchscreen display, 5MP camera and Android 4.2 firmware.   Before You Begin:  1:  Backup Your Data First. 2: Enable USB Debugging on your device. To do so, go to Settings > Applications > Development > USB debugging. The checkbox of USB Debugging should be ticked. 3: You should charge your device so that there is 30% or more amount of battery charge on your device. 4:   Download   USB Drivers  (ADB and Fastboot) for your Android device to make it compatible with Windows. Here Is The Procedure To install CWM Recovery Galaxy Trend Plus: First OF All Download Following Files: Odin307 .zip CWM_6.0.3.7_notouch_GalaxyTrendPlus_s7580_bdc_v0.2 .zip Follow The Easy Steps: 1. Extract Odin307.zip to a folder on your desktop. 2. Extract CWM_6.0.3.7_notouch_GalaxyTrendPlus_s7580_bdc_v0.2.zip to another folder on your desktop and you...