Skip to main content

Flash Official Firmware on Samsung Galaxy Ace S5830i Using Odin


Samsung Galaxy Ace S5830i is one of the most popular and best-selling low-end Android smartphones with nice features. The phone was released with Android 2.2 (Froyo) and was later upgraded to version 2.3.6 Gingerbread. Modest specs of the this handset make it unqualified to be updated to Ice Cream Sandwich or Jelly Bean but there are qualified and skilled developers out there who have successfully, but not buglessly, developed custom ROMs and mods to give you some ICS and JB flavor.
If you have recently tried a custom ROM and now want to go back to original Gingerbread ROM, you can install it manually. Sometimes the device does not start properly because it is caught in a bootloop and you can only see the Samsung logo with your device name. In such a situation, installing the official ROM is the best solution.

Download Firmware

Here are some multi-file firmwares for the Samsung Galaxy Ace s5830i. Below you will find the link to download single file firmwares.
You can also download single file firmware file for you country or region and install it as directed below. To download firmware for your Galaxy Ace S5830i, click here.

Getting Prepared

  • Download appropriate firmware file from above and extract the zip to your desktop computer.
  • Download Odin3 1.84 tool for multi-file installation (extract zip): Odin_with_pit_S5830I.Zip
  • Download Odin3 v3.07 for single file installation  (extract zip): Odin3-V3.07.Zip
  • Download and install Samsung USB Drivers on your PC: Download
  • Charge your phone and backup all essential data such as contacts, messages, apps using These Free Apps.
  • Open phone Settings> Applications> Development and enable USB Debugging.

Installing Stock Gingerbread Firmware

Turn off you phone and boot it into Download mode: hold down the Volume Down + Volume Up  buttons, then long press the Power key till the your phone’s screen turns up and you see the Download mode screen.Now on next menu click vol up button to enter download mode:
NOTE:: PLEASE INSTALL SAMSUNG KIES FIRST.OTHERWISE ODIN WILL NOT SEARCH YOUR DEVICE
Single File Installation:
  1. If you are going to do a single file installation, launch Odin3 v3.07.exe as administrator and connect the phone to computer via USB cable.
  2. When the device connections is established successfully the ID:COM port at Odin 3.07 turns blue.
  3. Click on PDA button and select the firmware file with .tar.md5 extension.
  4. Do not mess with any other thing in Odin and click the “Start” button.
Multi-file Installation:
  1. In case you choose to install a multi-file firmware, run Odin3 1.84.exe as administrator and connect your phone to PC while it is in Download mode.
  2. When the device is connected, the ID:COM will turn yellow.
  3. Make sure that “Re-Partition”, “Auto Reboot” and “F Reset Time” options are checked on Odin.
  4. Now click on PIT button and select the .pit file: cooperve_0623.pit
  5. Then click the PDA button and select the file with CODE in its name.
  6. Click Phone and select the file with MODEM in its name.
  7. Click on CSC and select the file with CSC in its name.
    ODIN-S5830I-multi-file-flashing
  8. Finally hit the “Start” button on Odin and let the installation finish.
The installation will take just a few minutes and when it is done your phone will reboot automatically. The first boot usually takes longer time so a little patience is required. When the phone boots, check the firmware version from Settings> About on your Galaxy Ace S5830i. Enjoy the new firmware. Cheers!

Comments

  1. Sometime few educational blogs become very helpful while getting relevant and new information related to your targeted area. As I found this blog and appreciate the information delivered to my database.
    ลิงค์ดูบอลออนไลน์

    ReplyDelete

Post a Comment

Popular posts from this blog

How To Root the Xolo Q700 and flash CWM Recovery

Do you want to root Xolo q700? Do you want to install CWM recovery and take backups, install custom ROMs and do more? Well, here's a step by step method to root the phone and install CWM recovery.  Requirements: The Xolo Q700 phone fully charged Download the USB and ADB drivers for the Xolo Q700 from  here  and  here Download the Motochopper rooting utility from  here Download the flash tool for the recovery from  here Download the recovery image from  here Download the necessary drivers and tools to a folder on your desktop and extract the archives to their respective folders. First, we shall root the phone and later install the CWM recovery patch. Make sure you have administrative rights on your Windows PC before you proceed. Install the necessary driver(s) Rooting the Xolo Q700 For this, we will need the USB and ADB drivers installed. Go ahead and install the drivers (usually one driver should work, but in certain cases, you would have to install bo...

How To Install Wordpress in Linux server

  Hello friend's In this session i am going to tell you how to install Worldpress in Linux server, Wordpress is open source blogging tool and CMS based on PHP and mysql which runs on a web hosting service. Wordpress is use by more then 18.9% of the top 10 million website. In order to install wp we have to configure the   web server   & mysql server. So now i am going to configure mysql database, As you can see sql database has been configured successfully and time to download Wordpress and configure the same, I already downloaded wordpress zip file, Ok guys we successfully configured the wordpress config file and added the our mysql database, user and password, all configuration done now time to move and install wordpress Go to you browser and type http://localhost (i did not configure dns server so i put localhost if you already install dns server then type you website name ) and fill required information After filling the same click to install Bingo :) wordpress ins...

Turn Your Cell Phone Into Jammer

 I have managed to build my own cell phone jammer, at last! And now  you  can do the same. Steps Working Principles . This cell phone jammer operates at GSM800 frequency since most mobile phones use it to operate. So the selected VCO is a sweeping oscillator, which is very effective but may be hard to construct for the beginners without nice RF-testing equipment. As a noise source you can use 45MHz clock oscillator which is driving Local Oscillator port located on a mini-circuit mixer. There is also an impedance matching network for Local Oscillator signal to pass through it. It is used to equate impedances of the clock oscillator and the port of the mixer. RF input (which is this port of the mixer) connected to the first 800MHz cell phone antenna, and the RF output is sent to the mini-circuit amplifier. This amplifier increases the output power for 15-16dbm. The amplified signal then sent to the second cell phone antenna. How It Works ?   All cell phones which use G...