Skip to main content

Increase RAM of Samsung Galaxy Y s5360

In this tutorial i will tell you about how to increase RAM of Samsung Galaxy Y s5360. Here’s the complete procedure:
As we all know that Samsung Galaxy Y s5360 is one of the nice & cheapest phones from Samsung. It consists of some nice features such as 830 MHz ARMv6 processor, 290 MB RAM, Android 2.3.5 Gingerbread, & many other things. It’s best in its class & cheap enough too.
So, here we will tell you how to increase RAM of Samsung Galaxy Y s5360. But before starting with the procedure, please read disclaimer, pre-requisite & other important notes. So, let’s begin with this.

Disclaimer:

We are not responsible if anything wrong happens in between the process. & just to be sure that this article is only for Samsung Galaxy Y s5360, so don’t try it on any other mobile or try it on your own risk.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Make sure that you’ve backed up all of the necessary data.
Tools needed during procedure:
  • MiniTool Partition Wizard for partitioning your SD card
  • Micro SD card (at least 4 GB) and card reader.
  • Swapper2 app.
  • ADB Terminal or Shell Emulator (to be sure that swap is installed or not)
  • Busy box (must be installed)
Before starting let me tell you something about SWAP. Swap is a virtual RAM and is a small chunk of the storage device kept aside and to be used as RAM.

Steps to increase RAM of Samsung Galaxy Y s5360:

Step 1:
Partition your SD card.
You can partition your memory card using the MiniTool Partition or using the ClockWorkMod.
Using MiniTool Partition:
  • Connect SD card to PC using card reader
  • Open partition wizard and search for your card
  • Just right click on your card and click delete partition and click at apply.
  • Now again right click on your card and click create partition, create the no. of partition and click at apply.
Using ClockWorkMod:
  • Just reboot and open recovery.
  • Open advanced settings and select Debugging.
  • Click on partition card and select a partition size.
Step2:
Download the swapper2 app and install it on your device. After completion of installation open the swapper 2 app and go to Menu -> Settings.
Step 3:
Set the swap path to /SD card/ swap.swp if you don’t want to create a mess.
Step 4:
Set a swap size (we would recommend 32 MB) and then set the swapiness (we would recommend 10 MB).
Step 5:
Now click on Safe unmount and then remount.
Note:
  • Above method was for the kernels which does not support swap partition
  • For the kernels that support swap partition
    • Check on use swap partition
    • Then select swap partition
Step 6:
After you set the preferences, go back and click on “ON” to start swap. And then reboot your device.
Step 7:
To ensure that you that you have successfully installed Swap, then install and open the ADB Terminal or Shell Emulator.
If the screen shows ‘0’ in swap line then the swap is not being installed.
And if the fields are filled then Swap is installed in your device.
So, in this way you can increase the RAM of Samsung Galaxy Y s5360.
Hope this article about how to increase RAM of Samsung Galaxy Y s5360 helped you.
Finished!

Comments

Popular posts from this blog

How To Root the Xolo Q700 and flash CWM Recovery

Do you want to root Xolo q700? Do you want to install CWM recovery and take backups, install custom ROMs and do more? Well, here's a step by step method to root the phone and install CWM recovery.  Requirements: The Xolo Q700 phone fully charged Download the USB and ADB drivers for the Xolo Q700 from  here  and  here Download the Motochopper rooting utility from  here Download the flash tool for the recovery from  here Download the recovery image from  here Download the necessary drivers and tools to a folder on your desktop and extract the archives to their respective folders. First, we shall root the phone and later install the CWM recovery patch. Make sure you have administrative rights on your Windows PC before you proceed. Install the necessary driver(s) Rooting the Xolo Q700 For this, we will need the USB and ADB drivers installed. Go ahead and install the drivers (usually one driver should work, but in certain cases, you would have to install bo...

How To Install Wordpress in Linux server

  Hello friend's In this session i am going to tell you how to install Worldpress in Linux server, Wordpress is open source blogging tool and CMS based on PHP and mysql which runs on a web hosting service. Wordpress is use by more then 18.9% of the top 10 million website. In order to install wp we have to configure the   web server   & mysql server. So now i am going to configure mysql database, As you can see sql database has been configured successfully and time to download Wordpress and configure the same, I already downloaded wordpress zip file, Ok guys we successfully configured the wordpress config file and added the our mysql database, user and password, all configuration done now time to move and install wordpress Go to you browser and type http://localhost (i did not configure dns server so i put localhost if you already install dns server then type you website name ) and fill required information After filling the same click to install Bingo :) wordpress ins...

How to Install CWM recovery on Samsung Galaxy Trend Plus GT S7580

Samsung  Galaxy  Trend Plus is a mid-range device, with its 1.2GHz CPU with 768MB RAM, 4-inch touchscreen display, 5MP camera and Android 4.2 firmware.   Before You Begin:  1:  Backup Your Data First. 2: Enable USB Debugging on your device. To do so, go to Settings > Applications > Development > USB debugging. The checkbox of USB Debugging should be ticked. 3: You should charge your device so that there is 30% or more amount of battery charge on your device. 4:   Download   USB Drivers  (ADB and Fastboot) for your Android device to make it compatible with Windows. Here Is The Procedure To install CWM Recovery Galaxy Trend Plus: First OF All Download Following Files: Odin307 .zip CWM_6.0.3.7_notouch_GalaxyTrendPlus_s7580_bdc_v0.2 .zip Follow The Easy Steps: 1. Extract Odin307.zip to a folder on your desktop. 2. Extract CWM_6.0.3.7_notouch_GalaxyTrendPlus_s7580_bdc_v0.2.zip to another folder on your desktop and you...